05 - Switchback Turn Signal Wiring - HIDProjectors.com Revision 2.0 - 2015 Jeep Wrangler JK

March 30, 2018

Learn how to wire switchback turn signals for the Revision 2.0 HID headlights on your Jeep Wrangler JK in this detailed tutorial.

Quick Look

Category

Mods, Builds, Maintenance

Brand

HIDProjectors

Product

Revision 2.0 Signature Series Headlights

Use Case

Switchback Turn Signal Wiring

Useful Links

• This is the turn signal (blinker) wiring of my Revision 2.0 Signature Series Switchback HID headlights with Halo, Angel Eyes, and Devil Eye.

Overview

In this tutorial, we’ll walk through the steps needed to wire the switchback turn signals for the Revision 2.0 Signature Series HID headlights on your 2015 Jeep Wrangler JK. These modifications can enhance both the functionality and aesthetic appeal of your Jeep, making it stand out on the road and off the beaten path.

What This Covers

This article will cover:

• Tools and materials needed
• Step-by-step wiring instructions
• Helpful tips for a clean installation
• Best practices to ensure reliable performance

Step-by-Step Breakdown

Let’s get into the details of how to successfully connect your switchback turn signals:

1. Gather Your Tools: You will need a wire stripper, a test light, heat shrink tubing, a zip tie, and electrical tape for this project.
2. Remove the Grill: To get to the wiring, remove the front grill of your Jeep. This not only gives you better access but also makes your work look much cleaner. Use caution to avoid damaging any clips.
3. Identify the Turn Signal Wire: On the driver's side, identify the white wire for the turn signal. This will serve as the point to tap into for the new wiring.
4. Create Jumpers: Cut lengths of wire to create jumpers. One will connect from the turn signal to the passenger side, and the other will be for the driver's side. Strip the ends, making sure one end of each jumper has a spade connection.
5. Tap Into the Wire: Use a technique known as a military tap, which involves splitting the existing wire’s sheathing to insert your jumper. This preserves the integrity of the wire.
6. Secure the Connection: Once connected, use a zip tie to secure the joint and prevent movement. After securing, cover the connection with liquid electrical tape to insulate it against moisture and dirt.
7. Wrap Everything Up: Use additional electrical tape to ensure everything is snug and tidy. You want to keep your work as clean as possible to resemble a factory finish.
8. Reinstall the Grill: Line up the grill with the clips and push them into place. Make sure all connections fit snugly to prevent any rattle.
9. Test the Signals: After reassembling, test both left and right turn signals. The modification should seamlessly integrate with your Jeep's existing lighting system.

Helpful Tips

Here are a few insider tips that can help streamline your installation process:

• Always disconnect the battery before working on vehicle wiring to avoid shorts and safety hazards.
• If you're unsure about wire colors and functions, refer to a wiring diagram specific to the 2015 Jeep Wrangler JK.
• Keep your work area organized to avoid losing small parts or tools during installation.
• Consider using heat shrink tubing over your splices for added insulation and protection against the elements.

Key Takeaways

This modification allows you to enhance the visibility and style of your Jeep. By following these step-by-step instructions, you can successfully wire your switchback turn signals with minimal fuss. Embrace the journey of customization and enjoy the beauty and functionality of your upgraded HID headlights. Whether you're cruising on highways or tackling off-road trails, these upgrades will undoubtedly make your Jeep stand out.