CPO Teraflex Swaybar Link Quick Disconnect Install (15 JKU)

July 14, 2015

Learn how to install Teraflex quick disconnects for swaybar links on your 2015 JKU with this detailed guide.

Quick Look

Category

Mods, Maintenance, Gear

Brand

Teraflex

Product

Swaybar Quick Disconnects

Platform

2015 JKU Willys

Use Case

Off-road articulation and flexibility

Category

Swaybar Mods

Useful Links

• 🔔 Please CLICK THE BELL if you want to see my videos! 🔔
• Some helpful O3D Jeeps links for you:
• Some helpful O3D Jeeps links for you:
• Some helpful O3D Jeeps links for you:

Overview

Installing quick disconnects for swaybar links is a crucial upgrade for any Jeep enthusiast looking to enhance their off-road experience. In this tutorial, we'll walk you through the installation process of the Teraflex swaybar quick disconnects on a 2015 JKU Willys. This mod not only boosts your rig's flexibility on the trail but also simplifies your setup when tackling challenging terrains.

What This Covers

We will be focusing on:

• Installation of the Teraflex Quick Disconnect Lower Stud Kit
• Installation of the JK Front Swaybar Quick Disconnect Upper Stud Bracket Kit
• Helpful tips to avoid common installation pitfalls

Step-by-Step Breakdown

Let's dive into the installation process:

1. Gather Your Tools: Before you begin, make sure you have a crescent wrench, a socket set, and some grease ready. Having the right tools on hand will make the process much smoother.
2. Remove Existing Components: Start by removing the bolts that hold the existing swaybar links to the axle. This is where your crescent wrench will get a workout. Stash the hardware away, as you won't be reusing them.
3. Disconnect Both Sides: Once you’ve tackled one side, move to the driver’s side and repeat the process. After both lower links are detached, maneuver the swaybar out of the way to tuck the links up safely.
4. Install Lower Studs: The Teraflex lower quick disconnect stud kit will come in handy here. Make sure to use the provided hitch pin clip, large pin retainer washer, flat washer, and lock nut. Pay careful attention to the orientation of the washers as you assemble them.
5. Fitting the Upper Bracket: Now it's time to install the JK front swaybar quick disconnect upper stud bracket kit. You will need to use the nut from the top link, as the ones from the bottom will likely not fit. A bit of grease can help make this a smoother fit.
6. Securing Everything: Ensure that all components are tight and secure. It's a good idea to double-check that the stud is fitted correctly and the pin slides in nicely. Anytime your swaybar is disconnected, it’s crucial that these components are reliable for safety.

Helpful Tips

• Use Grease: A little grease can go a long way in preventing wear and tear. Apply it to both the stud and the bushing to create a better seal and smoother operation.
• Disconnection Ease: To disconnect your swaybar when you’re on the trail, simply pull the pin, remove the washer, and tuck the link away. No wrenches necessary!
• Trial and Error: Don't get discouraged if the first attempt doesn’t go perfectly. Each Jeep is unique, and adjustments may be necessary. Take your time to ensure everything is done correctly.

Key Takeaways

Upgrading to Teraflex quick disconnects not only enhances your Jeep's off-road capabilities but also improves convenience. With the ease of disconnecting and connecting the swaybar quick release system, you'll experience more flexibility on the trails while knowing you have reliable components. This mod is a must-have for any serious off-roader, particularly on a 2015 JKU Willys.