Genesis Offroad Dual Battery Kit and Odyssey Extreme Installation - 2015 Jeep JK Wrangler
December 17, 2017
Explore the benefits and installation of the Genesis Offroad Dual Battery Kit and Odyssey Extreme Batteries for your Jeep JK.
Quick Look
Overview
Installing a dual battery system in your Jeep Wrangler JK can vastly improve its off-road capabilities, ensuring you have enough power to run all your accessories without draining your starting battery. In this tutorial, we’ll walk you through the installation of the Genesis Offroad Dual Battery Kit alongside Odyssey Extreme batteries, enhancing power efficiency and reliability.
What This Covers
This article will cover:
- A brief overview of the Odyssey batteries and Genesis Offroad kit
- Step-by-step installation process
- Helpful tips to ensure a smooth installation
- Key takeaways for future reference
Step-by-Step Breakdown
1. Gather Your Tools and Materials
Before starting, ensure you have the following:
- Genesis Offroad Dual Battery Kit
- Two Odyssey Extreme Series Batteries
- Basic hand tools (wrench set, screwdrivers, etc.)
- Safety gear (gloves and goggles)
- Magnetic tool or telescoping magnet for hard-to-reach bolts
2. Preparation and Safety
Make sure to disconnect the negative terminal first when working with any battery. This is crucial for avoiding electrical shorts. Additionally, working in cold weather can make plastic components more brittle, so handle them with care.
3. Remove the Old Battery and Tray
Start by carefully removing your Jeep's existing battery and battery tray. If you have aftermarket components, like a non-factory airbox, address their relocation as necessary to facilitate battery access. Each vehicle will have unique wiring that may need to be adjusted to accommodate the new setup.
4. Install the Genesis Offroad Kit
Once the old setup is out, mount the Genesis Offroad Dual Battery Kit. This unit comes pre-wired, making installation straightforward. Follow the specific instructions from Genesis, as they are well-detailed and helpful.
5. Install the Odyssey Batteries
With the tray in place, you can now position both Odyssey Extreme Batteries. Ensure that you utilize the correct polarity, as there are reverse polarity options available. Secure them firmly and connect the terminals, following the positive-to-positive and negative-to-negative configuration.
6. Connect Accessories
The Genesis kit includes power and ground bus bars for easy accessory connections. If you have aftermarket accessories like a winch or lights, now is the perfect time to integrate them into your dual battery setup.
7. Test Your Setup
Once everything is connected, perform a test to ensure that your new system works correctly. Turn on the ignition and check if both batteries are functional, along with any connected accessories.
Helpful Tips
Keep in mind the following during your install:
- Always verify your wiring connections with a multimeter after installation.
- Label any aftermarket wiring for clarity before disconnection.
- If you’re unsure about any step, refer to the Genesis installation video or seek advice from online forums.
Key Takeaways
The installation of a dual battery system using the Genesis Offroad kit and Odyssey Extreme batteries provides enhanced performance, especially for off-road adventures where power consumption can be high. Always ensure proper connections and maintain your system regularly to enjoy uninterrupted power on your trips. With this upgrade, you’ll be well-equipped for future adventures!