JK Dead Pedal Install from Team Tech Offroad

July 20, 2018

Learn how to install the TTO Dead Pedal for your Jeep JK and make every drive more comfortable with this easy upgrade.

Quick Look

Category

Mods, Maintenance, Off-Road

Brand

Team Tech Offroad

Product

Dead Pedal

Fitting

2007-2018 Jeep JK All Automatic Transmission Models

Useful Links

• Helpful Link
• Helpful Link

Overview

Driving a Jeep Wrangler is an exhilarating experience, but long trips can lead to one uncomfortable issue: leg fatigue from having nowhere to rest your left foot. Fortunately, Team Tech Offroad has come up with a straightforward solution—a dead pedal designed specifically for Jeep JK models. In this article, we'll guide you through the installation process while highlighting the benefits of this essential mod.

What This Covers

Installing a dead pedal can enhance your driving experience significantly, providing a stable place for your left foot and improving overall comfort. This tutorial will cover:

• Required tools for the installation
• Step-by-step installation process
• Tips to avoid common mistakes
• Benefits of using a dead pedal during your drives

Step-by-Step Breakdown

Before diving in, make sure you have the following tools on hand: a 10mm socket or wrench, a small ratchet, and, optionally, a few wire ties to manage any aftermarket wiring. Here’s how to install your new dead pedal:

1. Prep for Installation: Start by removing the two bolts that secure your door strap. Be sure to do this carefully to prevent any accidental damage to surrounding components.
2. Remove Ground Post Nuts: Locate the two ground post nuts. These are crucial as they hold the pedal in place. Remember, they are not meant to bear heavy loads, so avoid over-tightening.
3. Position the Dead Pedal: The dead pedal is adjustable, allowing you to find the position that feels most comfortable. Once aligned, place it over the ground posts.
4. Secure and Adjust: Start engaging the bolts gently to secure the pedal. Ensure that your aftermarket wiring does not obstruct the pedal's flat surface. Once the pedal feels secure, do not overtighten.
5. Final Checks: Reattach the door strap and give everything a once-over to ensure everything is secure and tidy.

Helpful Tips

Here are some pointers to make the installation smoother:

• Use a small ratchet for better control over torque to avoid snapping bolts.
• Consider adjusting the dead pedal in multiple positions to find your ideal comfort spot.
• Keep an eye on your aftermarket wiring while securing the pedal to ensure nothing gets pinched.

Key Takeaways

Adding a dead pedal to your Jeep JK is a simple yet effective upgrade that can make your driving experience much more comfortable, especially during long journeys and off-road adventures. The straightforward installation requires only basic tools and a bit of patience. By following the steps outlined in this tutorial, you'll soon have a dedicated spot for your left foot, alleviating fatigue and enhancing your comfort on the road. Don't forget to check out Team Tech Offroad for this and other quality mods!