ORO Tru-Turn Steering Stabilizer Relocation Kit Install - Jeep Wrangler JK - OffRoadOnly

October 14, 2018

Learn to install the ORO Tru-Turn Steering Stabilizer Relocation Kit for Jeep Wrangler JK and improve your off-road performance.

Quick Look

Category

Mods, Off-Road, Maintenance

Brand

Off Road Only

Product

Tru-Turn Steering Stabilizer Relocation Kit

Use Case

Relocating steering stabilizer for improved performance and protection

Useful Links

• Finally found my solution to relocate the steering stabilizer on OVERCLOCK3D. I've been running without one for several months... and even did the Colorado/Moab trip without one. A steering stabilizer isn't need to have a vehicle drive right...but it does help prolong the life of your steering components by dampening some of the high frequency vibrations and also protecting your gearbox from big jarring hits.

Overview

The ORO Tru-Turn Steering Stabilizer Relocation Kit provides an innovative solution for Jeep Wrangler JK owners looking to enhance their off-road performance. This kit allows you to securely relocate your steering stabilizer from its original position under the tie rod to a position along the drag link, providing better clearance and stability. In this tutorial, we’ll walk you through the installation process, share helpful tips, and discuss the benefits of this upgrade.

What This Covers

This article will cover the installation of the Tru-Turn Steering Stabilizer Relocation Kit, highlighting the necessary steps and helpful hints to make the process as smooth as possible. We will also discuss the practical benefits of relocating your steering stabilizer and how this modification can improve your overall Jeep experience.

Step-by-Step Breakdown

1. Preparation: Before beginning the installation, gather all necessary tools and ensure you have the ORO Tru-Turn kit along with a suitable steering stabilizer which you will need to purchase separately. Make sure you have a relaxing workspace where you can comfortably work on your Jeep.
2. Remove Old Parts: Start by unscrewing the bolts holding the sway bar in place. This will allow you to create space for the new bracket. Remove your existing steering stabilizer if it's still attached.
3. Install the New Bracket: Slide the relocation bracket provided in the kit between the frame and the sway bar bushing mount. Use blue thread locker on all bolts and tighten them just enough to hold the bracket in place temporarily. This will allow for some adjustment later on.
4. Install the Spacer: On the passenger side, install the spacer that balances the sway bar. Again, use thread locker and torque the bolts to ensure stability.
5. Attach the Steering Stabilizer: Extend your stabilizer to its full length and measure to find the midpoint of travel. This will be essential for proper installation so that the stabilizer works effectively throughout its motion.
6. Adjust and Secure: Test-fit the stabilizer to align it with your steering components. Adjust the bracket to ensure there’s enough clearance for all moving parts, and that it does not impede steering travel. Once everything appears correct, snug down all bolts fully.
7. Final Adjustments: Check all connections and run a clearance test by turning your steering from lock to lock. Ensure there are no obstructions and that the new position of the stabilizer allows full range of steering.

Helpful Tips

Here are a few tips to enhance your installation experience:

• Ensure both sides of the sway bar are balanced after installing the spacers to avoid alignment issues.
• Take your time when measuring the stabilizer; inaccurate midpoint placement can lead to premature wear.
• Using a locking nut will ensure that your stabilizer remains secure and does not work loose during off-road adventures.
• Consider using anti-seize on bolts to prevent rust and snug fit during the installation.

Key Takeaways

Relocating your steering stabilizer using the ORO Tru-Turn Steering Stabilizer Relocation Kit is a valuable upgrade for Jeep Wrangler JK owners. Not only does it enhance the overall stability of your steering system, but it also offers better protection from potential damage during off-road driving. By following this step-by-step guide, you can successfully install the kit and enjoy a more robust driving experience. With some minor adjustments and careful measurements, you’ll find that this modification provides both practical performance improvements and peace of mind on the trails.