Part 4 - Metalcloak Rear Overline Fender Install 2015 Jeep Wrangler JK - Final Assembly
April 19, 2018
Discover the final assembly of Metalcloak's Overline Tube Fender on a 2015 Jeep Wrangler JK with installation tips and insights.
Quick Look
- I'm installing Metalcloak Overline Tube Fenders on my 2015 Jeep JK Unlimited Wrangler. I am also installing the standard overline flares, Metalcloak inner fender liners, the rear overline fenders with exoskin, and the rear corner skins with LED tail lights.
- Easy to Install
- Ball Lock Joints secure each end of the Flare for incredible strength while providing the best Turning Clearance, best Object Deflection Angle and best Tire Clearance in the industry.
- Dovetailed for the best Object Deflection Angle, the Ball Lock Joints secure Flares for incredible strength and tub protection with just the right amount of clearance and coverage.
- Designed specifically as a mounting system for Quick Release rear flares, the flare mounting hardware is built right in.
Overview
This installment marks the final assembly of the Metalcloak Overline Tube Fender on a 2015 Jeep Wrangler JK Unlimited. In this tutorial, we will cover essential installation tips and practical insights that can enhance your own Jeep modification journey.
What This Covers
This article will detail the step-by-step process of installing the rear Overline fenders, standard overline flares, inner fender liners, and corner skins with LED tail lights. We will also discuss some troubleshooting advice, alignment issues, and the common pitfalls of working with aftermarket Jeep parts.
Step-by-Step Breakdown
- Initial Preparation: Begin by gathering all necessary tools: screwdrivers, a cutting tool for any necessary adjustments, and a set of rib nuts and bolts. Ensure your fender components are clean and ready for installation.
- Test Fitting: Before permanently affixing any parts, conduct a dry fit of the components. This allows you to visualize the fit and make any necessary modifications. If parts are misaligned, it’s critical to note where adjustments are needed.
- Drill and Install Rib Nuts: As you fit the fender, it may require drilling additional rib nuts. It's essential to mark your drill points carefully to ensure alignment with the body. This is where you'll anchor the fender securely and prevent any unwanted movement.
- Final Assembly: Tighten the screws and bolts gradually, ensuring not to over-tighten them too soon to allow for slight adjustments as necessary. Start from the areas that feel snug first and keep everything loose until the entire assembly is in place.
- Sealant Considerations: The recommendation against using sealants like RTV from manufacturers is noteworthy. It is believed that sealants could trap water, leading to rust issues down the road. Instead, allowing water to flow naturally around the parts minimizes this risk.
Helpful Tips
- Always double-check the manual for specific component placements to avoid misalignment.
- Consider using washers sparingly; sometimes, they can complicate the installation process.
- Document your installation with photos or notes—this can aid in future maintenance or if you decide to replace parts.
- Remember that patience is key. Allow time for adjustments during the fitting process to ensure a secure and well-aligned installation.
Key Takeaways
The Metalcloak Overline Tube Fender installation on your Jeep Wrangler JK can dramatically improve not just aesthetics but also off-road performance. By following these tips and understanding the installation process, you can achieve a clean, professional look while ensuring durability in off-road conditions. Embrace the journey of modifications as a way to personalize and enhance your Jeep for years of adventure.