PART TWO - Barricade Trail Force HD Rear Bumper Tire Carrier Install
October 13, 2015
Learn how to install the Barricade Trail Force HD Rear Bumper Tire Carrier with expert tips and insights from an experienced Jeep enthusiast.
Quick Look
Overview
Welcome back to our second part of the Barricade Trail Force HD Rear Bumper Tire Carrier installation series! In this discussion, we're diving into the intricacies of the tire carrier part of the build. If you missed the first part, make sure to check it out for a comprehensive understanding of the entire installation process. This article will cover everything you need to know to successfully mount and adjust your tire carrier, ensuring you enjoy countless off-road adventures.
What This Covers
We'll start by discussing essential tips for a smooth installation, moving onto the tools you'll need, and outlining the steps to get the job done efficiently. Whether you're a seasoned Jeep enthusiast or a newcomer looking to dive into your first modification, this guide is designed to help you navigate any challenges you might face.
Step-by-Step Breakdown
- Preparation: Before beginning, ensure you have the right tools on hand. A drill, a brake cylinder hone, marine grease, and a little creativity with common tools will go a long way during this installation. Sometimes, certain parts may not fit as expected, but don't worry—this is a common occurrence and can often be remedied with some minor adjustments.
- Addressing Hiccups: If you encounter stubborn components, like the hinge assembly, remember that many have faced the same issues. Using a hydraulic jack and gear puller can be ingenious solutions. There may be burrs or powder coating residue that can hinder assembly, so polishing these areas will help the components fit more smoothly.
- Installing the Carrier: Once you've handled any snags, it's time to install the tire carrier onto the rear bumper. Position it correctly, and secure it with the provided bolts. It's essential to check for level as you fasten the carrier—adjusting it slightly can prevent issues down the line.
- Adjusting Tire Position: With the tire off, you can better adjust the mount. Position your spare tire where it needs to go, measure, and secure the assembly according to the guidelines provided. Remember, the goal is to ensure your tire sits snug against the carrier for optimal support.
- Final Touches: Don’t forget to attach any additional components, like the latch assembly and third brake light, as these will enhance the functionality and safety of your build. Once everything is tightened down properly, double-check your work!
Helpful Tips
- A little lubrication goes a long way—use marine grease for the moving parts to ensure a smooth operation.
- Consider using a bicycle cable lock to secure your spare tire, especially if your setup doesn't have an easy locking mechanism.
- Always be prepared for unexpected challenges; keep your cool and think critically—most can be solved with some ingenuity!
Key Takeaways
The Barricade Trail Force HD Rear Bumper Tire Carrier installation can be a rewarding project for any Jeep owner. While you might face challenges along the way, the steps outlined will guide you through problem-solving effectively. Always remember, modifications are about personalizing your Jeep experience, so take your time and enjoy the process. We hope this guide assists you in creating a robust setup that enhances your off-roading adventures. Stay tuned for more Jeep mods and exciting content from O3D Jeeps!