Team Tech Offroad Hood Strut Installation

July 26, 2018

Learn how to install Team Tech Offroad hood struts for easier Jeep hood operation with this step-by-step guide.

Quick Look

Category

Mods, Maintenance, Builds

Brand

Team Tech Offroad

Product

Hood Struts

Use Case

Easier hood operation for Jeep JK

Useful Links

• This was such a simple install and really does make life so much easier! I knew when I saw these on Scott's Jeep, that I had to have them!

Overview

Installing hood struts on your Jeep JK can transform the way you interact with your engine bay. With the Team Tech Offroad hood struts, the tedious task of using a prop rod is eliminated. These struts allow for one-handed operation, letting you raise the hood smoothly and securely. If you're like many enthusiasts, once you see this modification in action, you'll likely want to install it on your rig.

What This Covers

In this article, we’ll guide you through the installation process for the Team Tech Offroad hood struts, which is designed to fit factory and most aftermarket Jeep JK hoods. We’ll discuss the tools required, a step-by-step breakdown of the installation, and offer some helpful tips to ensure a seamless experience.

Step-by-Step Breakdown

1. Gather Your Tools: For this installation, you will need a 3/8 inch drill bit, a drill, self-tapping screws, and a flat-head screwdriver. Don't forget safety goggles!
2. Prepare Your Jeep: Clear the area where the hood struts will mount. Remove anything obstructing the channel on both sides of the hood. Check for any wires or components that may interfere with the installation.
3. Mark Your Drill Points: Using a caliper or tape measure, find a consistent drilling point near the corner of the hood on both sides to ensure symmetry. Mark it clearly to avoid mistakes.
4. Drill the Holes: Start with a small pilot hole to avoid any damage. Gradually increase the drill size to 5/16” making sure the hole is clean.
5. Secure the Mounting Balls: Insert the balls for the struts, making sure to use nylock nuts to keep them in place. Tighten them down properly to prevent any future issues.
6. Install the Struts: Clip each strut onto the mounted balls on both sides. Make sure they are securely fastened.
7. Final Adjustments: Test the hood operation. It should comfortably stay open when lifted and not wobble unnecessarily. Make any minor adjustments if necessary.

Helpful Tips

• Keep it Clean: After drilling, apply some spray paint or automotive touch-up paint to the exposed metal to prevent rusting.
• Double-Check Clearances: Ensure that nothing obstructs the strut’s path when the hood is closed, especially if modifications have been made to your hood.
• Refer to the Manual: If you're unsure about placements or specifics, consult the installation manual that comes with the struts for diagrams and detailed instructions.

Key Takeaways

Installing hood struts on your Jeep JK is a practical modification that enhances both utility and convenience. With a few simple tools and the step-by-step instructions above, you can complete the installation in about 30 minutes without any complications. Remember to use the promo code O3D-STRUT for a discount and free shipping when purchasing the struts from Team Tech Offroad. This modification not only adds functionality but also elevates your overall experience when accessing your engine bay. Happy off-roading!